Drive Competitor II Semi-Electric Bed

ManufacturerDrive Medical
Model 15571
$599.00
Most items ship in 3 to 7 business days.

A semi-electric homecare bed. The head and foot raise on a motor and the height cranks by hand from 15.1" to 22.5". It holds 450 lbs., weighs 146 lbs. assembled and breaks down into four pieces.

Weight capacity
450 lbs.
Bed height range
15.1" to 22.5"
Mattress deck
34.65" W X 79.73" L
Bed weight
146 lbs.
Overview
Motorized head and foot and the lightest bed in the range at 146 lbs.

A semi-electric homecare bed. The head and foot sections raise on a motor from a corded hand control, and the height is set with a hand crank from 15.1" to 22.5". It holds 450 lbs. in total, weighs 146 lbs. assembled, and comes apart into four pieces of about 41 to 52 lbs. each.

Built for real life

What stands out

●
The head and foot raise on a motor
A corded hand control raises the head to 68 degrees and the foot to 30 degrees, so the person in the bed can change position without anyone lifting them.
●
146 lbs. and it comes apart
The head section, the foot section and the two bed ends are each 41 to 52 lbs. That makes this the easiest bed here to carry up a staircase or move between rooms.
●
Height cranks from 15.1" to 22.5"
Wind it down for a transfer and up for care at the bedside. The crank lives at the foot end.
●
8.3" of clearance underneath
That is more room under the bed than most homecare frames give, which matters if a floor patient lift has to get its legs under it.
●
Battery backup on the motors
A 9V battery in the handset and in each motor means the head and foot still move in a power cut.
●
Holds 450 lbs.
That figure covers the person, the mattress and everything else on the bed. Drive rates the patient alone at 350 lbs.
The Hieline Take

The thing that separates this bed from the other semi-electric beds here is weight and access rather than function. At 146 lbs. assembled and four pieces of 41 to 52 lbs., it is the one that actually gets carried up a narrow staircase by two people, and the 8.3" of clearance underneath is roughly three times what a low-height frame leaves, which is what a floor patient lift needs to roll its legs in and get a sling over somebody. If either of those describes your house, this is the bed, and the head and foot still work off a motor so the person in it can sit themselves up. What you give up is the height, which is a hand crank at the foot end, and a low setting of 15.1" that is a normal bed height rather than a fall-prevention one. Rails are not included on any of these frames and this one takes half rails or full rails, so budget for them separately if somebody needs something to hold onto.

Straight talk

Is it right for you?

A good fit if you

  • need a bed that can be carried in pieces up a staircase or moved between rooms
  • want the head and foot on a motor and are happy to crank the height
  • plan to use a floor patient lift, because this frame gives 8.3" of clearance
  • weigh up to 350 lbs., with a total load on the bed up to 450 lbs.

Look elsewhere if you

  • want the height motorised as well, in which case the full-electric beds here do that
  • need the deck lower than 15.1" for fall risk
  • need a deck wider than 34.65" or a load over 450 lbs.
  • want rails included, because they are ordered separately on this bed
Ready to Buy
Not included: A mattress or rails. The bed ships as a bare frame.
Mattress
Optional. A mattress is not included with this bed. Mattresses cannot be returned.
Add-ons
Optional. Tick anything you want added to the bed.
Your total
$599.00
Secure checkout, SSL encrypted