Drive Full Electric Low Height Bed

ManufacturerDrive Medical
Model 15005LP
$1,304.00
Most items ship in 3 to 7 business days.

A full-electric homecare bed. The deck runs from 9.5" to 22.5" and the head raises 70 degrees, all on one hand control with nothing to crank. It holds 450 lbs. and takes a standard hospital mattress.

Weight capacity
450 lbs.
Bed height range
9.5" to 22.5"
Mattress deck
34.65" W X 79.53" L
Head section
0 to 70 degrees
Overview
Height, head and knee on one control and it drops to 9.5"

A full-electric homecare bed. Height, head and knee all run off one six button hand control, with nothing to crank by hand. The deck drops to 9.5" from the floor and rises to 22.5", the head raises to 70 degrees, and it holds 450 lbs. in total on a 34.65" wide deck.

Built for real life

What stands out

●
Nothing on this bed is cranked
Height, head and knee all run off the same six button hand control. On a semi-electric bed the height is a hand crank at the foot end, and that is the job a carer does several times a day.
●
Drops to 9.5" from the floor
Low enough that getting out of bed is a short step down, and low enough to shorten a fall. At the other end of the travel it reaches 22.5" for care at standing height.
●
Head raises to 70 degrees
That is upright enough to eat, read or breathe more easily, and the foot section goes to 46 degrees to raise the legs.
●
Holds 450 lbs.
The 450 lbs. figure covers everything on the bed. Drive rates the patient alone at 350 lbs.
●
Rails bolt to marked points
The frame carries labelled mounting points for half rails and full rails, so either can be added later without drilling anything. Rails are ordered separately.
●
Runs at 65 dB or quieter
Drive rates the motors at 65 dB(A) or less, which matters on a bed that gets adjusted at night in a shared room.
The Hieline Take

This is the bed to buy when somebody is providing daily hands-on care, because the height is on the motor and that is the adjustment a carer makes over and over. A semi-electric bed saves real money and puts that one job on a hand crank at the foot end, which is fine if nobody is using it and irritating if somebody is. The 9.5" low setting is a genuine benefit for getting in and out, though it is not as low as the Prime Care P503 at 7.8", so if the reason you are shopping is fall risk rather than convenience, look at that one instead. The number most people miss on this bed is the 2.6" of clearance underneath. A floor patient lift rolls its legs under the bed to get the sling over the person, and most of them need more room than that, so if a lift is part of the plan measure its legs before you order. The bed arrives in two main pieces at 68 lbs. and 101 lbs., so it is a two-person job to put together.

Straight talk

Is it right for you?

A good fit if you

  • want the bed height motorised rather than cranked, because somebody is providing care several times a day
  • want a lower starting height than a standard homecare bed gives
  • weigh up to 350 lbs., with a total load on the bed up to 450 lbs.
  • may want to add rails later without changing the bed

Look elsewhere if you

  • plan to use a floor patient lift at the bedside, because there is only 2.6" of clearance underneath
  • do not need the height motorised, where the semi-electric Delta Ultra-Light costs a good deal less
  • need a true fall-prevention height, where the Prime Care P503 goes to 7.8"
  • need a deck wider than 34.65" or a load over 450 lbs.
Ready to Buy
Not included: A mattress or rails. The bed ships as a bare frame.
Mattress
Optional. A mattress is not included with this bed. Mattresses cannot be returned.
Add-ons
Optional. Tick anything you want added to the bed.
Your total
$1,304.00
Secure checkout, SSL encrypted