WHILL Model C2 High Back Seat

ManufacturerWHILL
Model WHILL-24-10071-0
$399.00
Most items ship in 3 to 7 business days.

A 20" high back seat that turns a standard Model C2 into a high back chair. It adds 7" of seatback over the standard seat, adjusts through a 21.8" to 26.5" back support height, carries four lateral adjuster pads, and bolts to the existing frame.

Fits
WHILL Model C2, 18" or 20" seat
Back height
20", adding 7"
Back support angles
90°, 95° and 100°
Overview
Seven more inches of back support.

A 20" high back seat for the WHILL Model C2, adding 7" over the standard seatback, with a 21.8" to 26.5" back support height and four lateral adjuster pads. It fits an 18" or 20" seat.

Built for real life

What stands out

●
7" more seatback
A 20" back against the standard Model C2 seat, for support above the shoulder blades.
●
Fits the existing frame
No cane backrest system is needed, which is what keeps this a simple fitting.
●
Adjusts to your shoulders
The back support height runs 21.8" to 26.5", measured from the seat to the top of the cushion.
●
Four lateral adjuster pads
They set the contour deeper on one side or both.
●
Keeps the back support angles
Back support angle stays adjustable at 90, 95 and 100 degrees.
The Hieline Take

This is the cheaper of two ways to get a high back Model C2, and which one you want depends on whether you already own the chair. If you are buying new, the Model C2 High Back is a complete chair at $4,299 and there is nothing to fit. If you already have a standard Model C2 and your needs have changed, this part gets you there for $399 without replacing a working chair. It installs straight to the existing frame with no cane system, which is the detail that keeps it simple and cheap. What it gives you is a 20" back against the standard one, 7" more height, a back support height running 21.8" to 26.5", and four lateral pads for a deeper contour. It keeps the 90, 95 and 100 degree back support angles. It fits 18" and 20" seat widths, so a 16" Model C2 is out.

Straight talk

Is it right for you?

A good fit if you

  • already own a Model C2 and now need more back support
  • want support above the shoulder blades rather than a standard seatback
  • need lateral contouring from adjuster pads
  • have an 18" or 20" seat width

Look elsewhere if you

  • have a 16" seat width, which this does not fit
  • are buying a new chair anyway, in which case take the Model C2 High Back
  • need a backrest specified by a seating clinic, which needs the cane backrest kit instead
Ready to Buy
Your total
$399.00
Secure checkout, SSL encrypted